ZENIO-P1 in housing with bracket and silicone lining for non-slip attachment to putter shafts (between 8.9mm and 9.8mm), approx. 20cm above the clubhead with standard bracket. Exchangeable bracket for shafts up to 10.8mm.
ZENIO-P1 technical specs
|Weight||Approx. 29 grams|
|Operating temperature||10° to 40° C|
|Moisture||< 85%, non-condensing|
|Voltage supply||Lithium polymer battery|
|Operating time||> 4 hours after a full charge|
|Charging voltage||5V DC, max. 100mA charging current|
|Charging temperature||Between 0° C and 40° C is possible|
|Charging duration||1.6 hours for >95%, 1h for 80%|
|Standby duration||6 days, if fully charged|
|Interfaces||Charging socket Mini-USB for sensor and charging cable|
|Yellow LED for status display|
|Bluetooth v2.0 (without EDR), Class 2, max 2.5mW|
|Range outdoors approx. 20m|
For removable application to club head.
|Size||19mm x 55mm|
|Active sensor area||Approx. 15mm x 50mm|
|Connection to electronics||Via integrated Mini-USB socket|
|Weight||Approx. 6 grams|
USB-A and Mini-USB socket, 50cm
Note: This cable is not designed for data transfer based on the USB standard. You can however use any certified USB cable with USB-A and Mini-USB socket instead of the ZENIO charging cable.
Double adhesive strip with clip on one side to hold in place while positioning/removing the position sensor on the clubhead surface.
|Size||19mm x 62mm, clip on one side 7mm|
|Material basis||3M 9195|
Deer Skin design case for all parts of the ZENIO system.
|Size||Approx. 15cm x 10cm x 2.5cm (LxWxH)|
|Material basis||Deer Skin design synthetic leather|
Declaration of conformity
ZENIO is a highly accurate measuring system which uses the best technology. The accuracy of the system has been tested by one of the TopoMetric GmbH, the largest service company for optical measurement in Europe.
You can download a copy of ZENIO's operating manual here. (PDF, 2,5 MB)