ZENIO is a highly accurate measuring system which uses the best technology. The accuracy of the system has been tested by one of the TopoMetric GmbH, the largest service company for optical measurement in Europe.

Download Declaration of Conformity

Electronic unit

ZENIO-P1 in housing with bracket and silicone lining for non-slip attachment to putter shafts (between 8.9mm and 9.8mm), approx. 20cm above the clubhead with standard bracket. Exchangeable bracket for shafts up to 10.8mm.

Weight	Approx. 29 grams
Operating temperature	10° to 40° C
Moisture	< 85%, non-condensing
Voltage supply	Lithium polymer battery
Operating time	> 4 hours after a full charge
Charging voltage	5V DC, max. 100mA charging current
Charging temperature	Between 0° C and 40° C is possible
Charging duration	1.6 hours for >95%, 1h for 80%
Standby duration	6 days, if fully charged
Interfaces	Charging socket Mini-USB for sensor and charging cable
	Yellow LED for status display
	Bluetooth v2.0 (without EDR), Class 2, max 2.5mW
	Range outdoors approx. 20m

Position sensor for removable application to club head.

Size	19mm x 55mm
Active sensor area	Approx. 15mm x 50mm
Connection to electronics	Via integrated Mini-USB socket.
Weight	Approx. 6 grams

Charging cable

USB-A and Mini-USB socket, 50cm

Note: This cable is not designed for data transfer based on the USB standard. You can however use any certified USB cable with USB-A and Mini-USB socket instead of the ZENIO charging cable.

Adhesive strips

Double adhesive strip with clip on one side to hold in place while positioning/removing the position sensor on the clubhead surface.

Size	19mm x 62mm, clip on one side 7mm
Material basis	3M 9195

Case

Tour Edition: Deer Skin design
Coach Edition: Deer Skin design
Fitting Edition: Deer Skin design

Size, each approx. 15cm x 10cm x 2.5cm (LxWxH)

Click here to read more:

Downloads

Operating Manual